Mini Carriers
This is a list of “mini” carrier boards for CRUVI modules. It is also possible to use them in reverse mode as a SoM.
CR00010 MAX10 (VHDplus)
This is a special mini carrier developed and produced for exclusive use by VHDPlus as Core MAX10.
Note that the 100mil pin headers on the bottom side of the board are not covered by the CRUVI Standard.
Additional information can be found at VHDPlus website.
CR00100 MAX10
CR00103 Certus-NX
CR00107 Spartan-7
TEI0050 Cyclone V
Mini carrier (aka CYC5000) with Cyclone V FPGA. The base form factor is Arduino MKR format, with the addition of one CRUVI HS connector at the edge.